1reading
Written by
Giedrius PatlabaCEO & co-founder, Wood Architects163 pieces · 30 followersFollow Giedrius to see new posts in your feed, on your phone or by email.
Written by
Giedrius PatlabaCEO & co-founder, Wood Architects163 pieces · 30 followersFollow Giedrius to see new posts in your feed, on your phone or by email.
More from
Giedrius Patlaba →How Should a Hotel Measure Sauna Recovery After Door Openings?
Key Takeaways Recovery starts from an agreed ready condition, not an arbitrary controller reading. Script the door position, event timing and sequence before the test begins. Use the same sensor, sampling clock, controls and ventilation state for every run. Report the temperature…
How Should a Hotel Measure Sauna Energy Use Per Guest Session?
Key Takeaways Define a qualifying guest session before dividing any meter total. Use a dedicated electrical boundary and one time-stamped operating log. Allocate heat-up, ready-state holding and occupied energy by a written rule. Keep cancelled, staff and interrupted sessions…
What Test Conditions Make Sauna Heat-Up Times Comparable?
Key Takeaways Comparable heat-up times need the same start state, finish rule and measurement boundary. Record the cabin, heater, controls, ventilation and enabled auxiliary loads before every run. Use one agreed sensor position rather than the controller display alone. Start the…
